Changes

Jump to: navigation, search

Streaming/en

2,979 bytes added, 15:49, 17 October 2021
→‎Transition from versions 2.0.х to version 2.1 and higher
== Installation Launching broadcast==
=== Installing ACE Stream on Debian/Ubuntu from repository Main terms=== *'''Step 1Source''' Add link on appropriate repository into <tt>/etc/apt/sources.list</tt> file. Repository should be selected according to operating system. ''Debian 6+:- a program that accepts broadcast'' <tt><nowiki>deb http://repo.acestream.org/debian/ squeeze main</nowiki></tt> or <tt><nowiki>deb http://repo.acestream.org/debian/ sid main</nowiki></tt> Note: packages in sid repository are assembled with dependencies that correspond to official sids HTTP-repositories stream and provides playback of Debianbroadcast using ACE Stream software.If you don*'t know, which repository to choose, use squeeze. ''Ubuntu 11.10:Support node'' <tt><nowiki>deb http://repo.acestream.org/ubuntu/ oneiric main</nowiki></tt> ''Ubuntu 12.04:'' <tt><nowiki>deb http://repo.acestream.org/ubuntu/ precise main</nowiki></tt> ''Ubuntu 12.10:'' <tt><nowiki>deb http://repo.acestream.org/ubuntu/ quantal main</nowiki></tt> '''Step 2''' Installing public key. To do this you have - a program allowing to run the following command: ''Debian:'' <tt><nowiki>wget scale broadcast using additional server equipment and Internet-O - http://repochannels.acestream.org/keys/acestream.public.key | apt-key add -</nowiki></tt> *''Ubuntu:'Client' <tt><nowiki>sudo wget -O - http://repo.acestream.org/keys/acestream.public.key | sudo apt-key add -</nowiki></tt> '''Step 3''' Installing the right package. For example- ACE Stream software, for engine installation you have which is used to install acestream-engine packageplay broadcast.
''===Transition from versions 2.0.х to version 2.1 and higher===From September, 10, 2013, upgraded version of the engine (2.1.6) for Ubuntu, Debian''and CentOS is available.Before using a new version for production, we recommend to test it on one or several broadcasts, if possible. <tt>apt-get update<If you face any problems, please, write to the forum (https:/tt> <tt>apt-get install /forum.acestream-engine<.media/tt>latest) or email 'support@acestream.net'.
''Ubuntu'' <ttspan style="color: #900;">sudo apt-get updateATTENTION!</tt> <tt>sudo apt-get install acestream-engine</ttspan>In the nearest future support for older versions will be stopped.
The following packages are available in the repository for Ubuntu<span style="color:*'''acestream-engine''' - engine*'''acestream-mozilla-plugin''' - plug-in for browser*'''acestream-player''' - desktop player*'''acestream-player-data''' - set #009;">IMPORTANT!</span> All broadcasts created via new version of common libraries for the player Ace Stream (2.1 and plug-in*'''acestream-full''' - full package, including all higher) are not suppported by client software of old versions (2.0.х and lower). If you attempt to watch a new broadcast using the aboveold engine, an error "Cannot load transport file" will appear.
For Debian only ====Changes in launch parameters====Some parameters of the engine (acestream-engine) is availablelaunch of sources and support nodes from the command line have been changed, therefore the launch with the old command line will not work.
=== Installing ACE Stream package on Ubuntu from debMain changes:* one executable file is used <tt>acestreamengine</tt>; different launch modes (a source, support node) are set by options:** instead of <tt>acestreamengine-stream</tt> you should launch <tt>acestreamengine --stream-source</tt>** instead of <tt>acestreamengine-node</tt> you should launch <tt>acestreamengine --stream-node</tt>** instead of <tt>acestreamengine-client-console</tt> you should launch <tt>acestreamengine --client-console</tt>** instead of <tt>acestreamengine-client-gtk</tt> you should launch <tt>acestreamengine --client-package ===gtk</tt>You can install ACE Stream on Ubuntu without using repository* log system is changed. To do this you need to download In old versions the installation package by one of links below engine output all debug information into STDERR and install redirecting the output was required to write logs into a file. In a new version it using is possible to define in options, where to write logs - into STDOUT, into STDERR, into a package manager (file or syslog. Rotation of logs by their size is supported for example, by double click on downloaded package)files.You can read description of all options in [[#acestreamengine command|acestreamengine command]]
Package for 32-bit ===Transition from versions of Ubuntu:2.1.х to version 3.0.x and higher=== <tt>httpSee main article about Ace Stream v.3 - https://dlwiki.torrentstreamacestream.orgmedia/products/acestream-full/ubuntu/i368/latest<AceStream_3.0/tt>en
Package ===acestreamengine command===Starting from version 2.1 Ace Stream Engine for 64-bit versions of Ubuntu: Linux represents a single executable file <tt>http://dl.torrentstream.org/products/acestream-full/ubuntu/amd64/latestacestreamengine</tt>, which works in different modes, depending on specified parameters.
Supported versions Work mode is set by one of Ubuntuthe following parameters: 11.10, 12.04, 12.10* <tt>--client-console</tt> - launch engine in a client mode from console (without a graphic interface)* <tt>--client-wx</tt> - launch engine in a client mode with a graphic interface WX* <tt>--client-gtk</tt> - launch engine in a client mode with a graphic interface GTK* <tt>--stream-source</tt> - launch a source of broadcast* <tt>--stream-node</tt> - launch a support node* <tt>--create-transport</tt> - create a transport file from existing content (VOD)* <tt>--create-transport-multi</tt> - create a multi-stream transport file* <tt>--version</tt> - show engine version
This intallation package is an analog of <tt>acestream-full</tt> package from repository. It includes the engineEach work mode has their own required and not required parameters, player and plug-described in for browsersappropriate sections.
==Launching broadcast==Also all work modes have common parameters that manage the output of debug information.* <tt>--log-stdout</tt> - deduce information in STDOUT===Main terms===* <tt>--log-stderr</tt> - deduce information in STDERR* <tt>--log-file PATH</tt> - deduce information in a specified file*'''Source''' <tt>- program that accepts HTTP-stream log-max-size SIZE</tt> - maximum file size (bytes)* <tt>--log-backup-count COUNT</tt> - how many backup logs have to be stored (backup log file is created when a limit, specified by a parameter --log-max-size, is reached)* <tt>--log-file-buffer SIZE</tt> - enable buffering of broadcast and provides broadcast viewing output into the file (using ACE Stream software.buffer of specified size in bytes)*'''Support node''' <tt>--log-syslog HOST</tt> - deduce information in syslog- program allowing to scale broadcast using additional server equipment and Internetat the specified address* <tt>--log-syslog-port PORT</tt> - syslog-channels.server port*'''Client''' <tt>--log-syslog-facility FACILITY</tt> - ACE Stream software, which is used to play broadcast.facility* <tt>--log-syslog-buffer SIZE</tt> - enable buffering of output into syslog (using buffer of specified size in bytes)
===Common work scheme ===
The source accepts HTTP-stream to input (at this moment HTTP-streams with MPEG-TS encapsulation are supported) with original broadcast and creates a file with acelive extension after the launch. This file is a unique identifier of broadcast and it is used for connection and playback by clients.
===Syntax of acestreamengine--stream -source command===<tt>acestreamengine--stream-source</tt> command launches broadcast source.
''required parameters''
*<tt>--cache-dir CACHE_DIR</tt> - directory for creating service files (broadcast cache and others)
*<tt>--publish-dir PUBLISH_DIR</tt> - directory, in which acelive-file will be created
*<tt>--piecesize PIECESIZE</tt> - piece size in bytes , power of two (if it's not specified, it's set automatically depending on bitrate)
*<tt>--duration DURATION</tt> - size of broadcast cache in format HH:MM:SS (by default, one hour: 01:00:00)
*<tt>--host HOST</tt> - set address of local tracker manually
*<tt>--provider-key PROVIDER_KEY</tt> - provider's key (only for commercial broadcasts)
*<tt>--maxclients MAXCLIENTS</tt> - maximum number of peers, on which data from the source are given simultaneously
*<tt>--showlog-piecesdebug DEBUG</tt> - show set the debug level (default is 0 - minimum log level)*<tt>--source-read-timeout SECONDS</tt> - timeout for reading data from the original source (in log numbers seconds). Default is 30.*<tt>--source-reconnect-interval SECONDS</tt> - interval is seconds, after which the engine will try to reconnect to the original source in case of pieces connection lost. Default is 5.*<tt>--pid-file-dir PATH</tt> - the directory where engine's pid file is created. Default is /tmp.*<tt>--provider-key</tt> - provider key (for an affiliate program)*<tt>--sid</tt> - content identificator for statistics(for an affiliate program)*<tt>--permanent</tt> - mark the broadcast as they are created24/7 (it's available all the time)*<tt>--date-start YYYY-MM-DD HH:mm:ss</tt> - set the data and time of the broadcast start (for the broadcasts which runs during a limited time)*<tt>--date-end YYYY-MM-DD HH:mm:ss</tt> - set the data and time of the broadcast end(for the broadcasts which runs during a limited time)*<tt>--premium</tt> - request a "premium" status for the broadcast*<tt>--upload-limit</tt> - limit upload speed (bytes/s, default is 0 - don't limit)*<tt>--max-connections</tt> - limit total number of connections (default is 1000)*<tt>--showmax-peers</tt> - periodically show in log list limit number of connected connections to other peers(default is 50)*<tt>--service-remote-access</tt> - enable remote statistics*<tt>--service-access-token</tt> - password for remote statistics access*<tt>--stats-report-interval</tt> - interval in seconds between internal statistics update (default is 60)*<tt>--debug DEBUGstats-report-peers</tt> - set debug levelupdate information about connected peers in the internal statistics (increases CPU load)
''additional''
*<tt>-h, --help</tt> - show commands' description
=== Syntax of acestreamengine--stream-node command===<tt>acestreamengine--stream-node</tt> command launches support node.
''required parameters''
*<tt>--allow-support-download</tt> - allow receiving data from other support nodes
*<tt>--allow-peers-download</tt> - allow receiving data from ordinary peers
*<tt>--max-incoming-connects MAX_INCOMING_CONNECTSconnections MAX_CONNECTIONS</tt> - maximum limit number of incoming total connections (from other peers) (by default: is 1000)*<tt>--max-outgoing-connects MAX_OUTGOING_CONNECTSpeers MAX_PEERS</tt> - maximum limit number of outgoing connections (to other peers) (by default: is 50)
*<tt>--max-upload-slots MAX_UPLOAD_SLOTS</tt> - maximum number of peers, on which data from support node are given simultaneously (by default: 7)
*<tt>--max-download-speed MAX_DOWNLOAD_SPEED</tt> - maximum download speed (byte/s). By default: 0 (no restrictions).
*<tt>--max-upload-speed MAX_UPLOAD_SPEED</tt> - maximum upload speed (byte/s). By default: 0 (no restrictions).
*<tt>--showlog-piecesdebug DEBUG</tt> -show in set the debug level (default is 0 - minimum log numbers of pieces as they are createdlevel)*<tt>--service-remote-access</tt> - enable remote statistics*<tt>--showservice-peersaccess-token</tt> - periodically show in log list of connected peers password for remote statistics access*<tt>--stats-report-interval STATS_REPORT_INTERVAL</tt> - set interval in seconds to show in log information about download/upload speep. By between internal statistics update (default: 0 (do not showis 60).*<tt>--debug DEBUGstats-report-peers</tt> - set debug levelupdate information about connected peers in the internal statistics (increases CPU load)
''additional''
We launch the source on server 192.168.1.1:
<tt>acestreamengine--stream -source \
--name "test" \
--title "Test broadcast" \
--publish-dir "/home/www/streams" \
--cache-dir "/tmp/streams" \
--add-authorized-peers \ > /tmp/test-source.log 2>&1</tt>
The last line is used to write logs into file /tmp/test-source.log. By default <tt>acestreamengine--stream-source</tt> shows outputs all debug information in console in STDERRthe STDOUT.
<tt>--add-authorized-peers</tt> option adds the list of authorized nodes to acelive-file (in this case, it's the source: 192.168.1.1).
In this example we assume that XBT Tracker is installed and launched on server 192.168.1.1.
Now broadcast's launch will look like:
<tt>acestreamengine--stream -source \
--name "test" \
--title "Test broadcast" \
--add-authorized-peers \
--skip-internal-tracker \
--tracker "udp://192.168.1.1:2710/announce" \ > /tmp/test-source.log 2>&1</tt>
<tt>--skip-internal-tracker</tt> option disconnects embedded tracker, <tt>--tracker</tt> option connects external tracker.
using <tt>--support-node</tt> option:
<tt>acestreamengine --supportstream-node</tt>: <tt>acestreamengine-stream source \
--name "test" \
--title "Test broadcast" \
--tracker "udp://192.168.1.1:2710/announce" \
--support-node "192.168.1.2:8621" \
--support-node "192.168.1.3:8621" \ > /tmp/test-source.log 2>&1</tt>
Launch support nodes on servers 192.168.1.2 and 192.168.1.3 (commands are the same):
<tt>acestreamengine--stream-node \
--url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
--state-dir "/tmp" \
--source-node "192.168.1.1:7764" \
--allow-source-download \ > /tmp/test-node.log 2>&1</tt>
Option <tt>--source-node</tt> sets source address.
On server 192.168.1.2 it will look like:
<tt>acestreamengine--stream-node \
--url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
--state-dir "/tmp" \
--allow-source-download \
--support-node "192.168.1.3:8621" \
--allow-support-download \ > /tmp/test-node.log 2>&1</tt>
On server 192.168.1.3:
<tt>acestreamengine--stream-node \
--url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
--state-dir "/tmp" \
--allow-source-download \
--support-node "192.168.1.2:8621" \
--allow-support-download \ > /tmp/test-node.log 2>&1</tt>
====Private source with two support nodes====
To make the source private, option <tt>--private-source</tt> must be specified:
<tt>acestreamengine--stream -source \
--name "test" \
--title "Test broadcast" \
--support-node "192.168.1.2:8621" \
--support-node "192.168.1.3:8621" \
--private-source \ > /tmp/test-source.log 2>&1</tt>
Notice that in this configuration tracker's address is changed to <tt>udp://192.168.1.2:2710/announce</tt>. It was made to support old versions of clients, which do not process a list of authorized peers (more details here [[#Authorized peers|Authorized peers]]).
 
Launch support nodes on servers 192.168.1.2 and 192.168.1.3 as usual:
<tt>acestreamengine--stream-node \
--url "<nowiki>http://192.168.1.1/streams/test.acelive</nowiki>" \
--state-dir "/tmp" \
--source-node "192.168.1.1:7764" \
--allow-source-download \</tt> ====Recent scripts and configuration examples==== > Python-based launch scripts with configuration examples and some brief explanation available via https:/tmp/test-nodegithub.log 2>&1<com/acestream/tt>streaming-utils
Retrieved from "https://wiki.acestream.media/Special:MobileDiff/70...744"

Navigation menu